The Hidden Mission Forum
3D MANDLEBROT - Printable Version

+- The Hidden Mission Forum (http://thehiddenmission.com/forum)
+-- Forum: Straight Talk on Anomalous Topics (http://thehiddenmission.com/forum/forumdisplay.php?fid=3)
+--- Forum: Tell us about it... (http://thehiddenmission.com/forum/forumdisplay.php?fid=7)
+--- Thread: 3D MANDLEBROT (/showthread.php?tid=3916)



RE: 3D MANDLEBROT - Vianova - 11-21-2018

...
The last three are pretty intense.
The second image needs to viewed from bottom up.

The last image looks like something to seriously avoid in an alien landscape.
It may have lovely colors to lure one in,
but it just might be a better idea to send the drone in for a close up view.
...


RE: 3D MANDLEBROT - Kalter Rauch - 11-21-2018

A major drawback in M3D is its limited ability to zoom into a feature...further experimentation is called for......  Hmm2


RE: 3D MANDLEBROT - Kalter Rauch - 11-21-2018

DE Combinate Makin4d-p8(SphHMVoid+Menger1)...max magnification...afaik...…

[Image: kjsV53i.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 11-24-2018

[Image: iwitQ6t.jpg]

[Image: UkaljPF.png]

[Image: ZflwHBS.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 11-25-2018

DE Decombinate Sphere Heightmap with hybrid of Makin nsr-tri and Menger SMT...

[Image: QrdljB0.png]


RE: 3D MANDLEBROT - Vianova - 11-25-2018

...
I tried one of your creations a few days ago,
and just wrecked it into a failure,
which is why I didn't post it.
It's frustrating when one takes an hour and a half spinning a splice through 4 geometries,
and comes up with a pancake of 2D poo foo.
I'll try again soon.
...


RE: 3D MANDLEBROT - Kalter Rauch - 11-25-2018

When I get to that point,
I just run the whole thing
through GIMP Dream Smoothing.
That's what I did with the first image of the last four.


RE: 3D MANDLEBROT - Kalter Rauch - 11-26-2018

Magnified Sphere Heightmap De Combinated with hybrid of Makin and Menger formulas.

Today will be the 8th US Mars landing...
The spherical heightmap is scaled to be just below the hybrid surface features,
showing parts of this sphere through the Makin/Julia portals...

[Image: bqP9GrV.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 11-28-2018

[Image: cNbDRwz.jpg]

[Image: Yj76PwO.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-01-2018

The naming of these images
derives from the fact that they are hybrids
of several formulas and transformations.
They may combine serially, alternating from the first through up to six others,
or as a "DE Combinate" referring to formula #1 combining with a separate hybrid made of the remaining types.
There is also an "Interpolation" method using only two formulas.


DE Combinate Makin4Dp4(SphereHeightMap+NewMenger2)

[Image: KZo0WO9.jpg]


RE: 3D MANDLEBROT - Vianova - 12-02-2018

...
That last one is killer.
I had some energy and time tonite to get one done all the way.
This is primetime rock hound jade rescue these last 3 days and 3 to come.
Up at 5- 5:30 AM, on the rock bars by 630 -7.
120 mile round trip commute, back to bed early.
Half day tomorrow.

This one looks nice, 
but my octagons cannot be perfect because my program does not have half degrees.

[Image: UDBZtPG.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-03-2018

[Image: ba6B9iD.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-04-2018

[Image: Skb0I7Y.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-05-2018

[Image: l9YQpbD.jpg]


RE: 3D MANDLEBROT - Vianova - 12-07-2018

...

This one is made from your image 2 posts back.
I made a large pentagonal reconstruction that was good,
but wanted some variety,
and so I spliced these two out of the pentagon.


[Image: ln9UZfN.jpg]




[Image: oUylheT.jpg]


rotated 90 degrees looks nice as well.

...

...

excellent resolution at 500% ... 
follow around the circumferential perimeter of the object within the blue background,
in the last image object at 500%.

...


RE: 3D MANDLEBROT - Kalter Rauch - 12-08-2018

Yes...the slimy green gargoyles...
they evoke a repellant fascination
like the trypophobic response...…

The next two images are 2 versions
of a DE Combinate of Height Map
and hybrid of (General+Hopf4D +Menger SMT) formulas...

[Image: 80WovOg.jpg]

[Image: liZux8V.jpg]

DE (Distance Estimation) Combining in M3D 
can involve one of six methods,
depending on what happens when formula 1 (i.e... Height Map) overlaps the hybrid.
Look at the bottom part of the two images where the cubic Menger overlays  the ground.
In the 2nd image I increased the DE parameter
which increased the ground effect upon the Menger,
resulting in the blurred features.


RE: 3D MANDLEBROT - Kalter Rauch - 12-10-2018

These next two images
first shows rendering with all kinds of noise, bumpmapping, etc.,
and the second is running it through Dream Smoothing and Relief Light only...

[Image: CzjjFH4.jpg]

[Image: HKle7vE.jpg]


RE: 3D MANDLEBROT - Vianova - 12-12-2018

...
In post 1963, {a couple back}
the first image has a background I like,
but the primary central object in there,
does not compete with the quality of the central object seen in the second image.

The blurry second image background does not do justice for the fractalized object within,
and the back ground also shows odd stitch lines.

Perhaps install the first image style background,
behind the central object of the second image?
...


RE: 3D MANDLEBROT - Kalter Rauch - 12-12-2018

I think some or all of those things can be explained and possibly improved...  Hmm2
__________________________________________________________________

DE Combinate Sphere Heightmap(Aexionc+MengerHyper+Hopf4D)Julia...

[Image: hEOCGFF.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-12-2018

[Image: QJtHGUo.jpg]


RE: 3D MANDLEBROT - Vianova - 12-13-2018

...
Might have been over sharpened,
though usually over sharpening works when transferred into Imgur then to the forum.
let's see.

[Image: rbRr6Io.jpg]


yea, it could be better resolution, but it is cool enough.

....


RE: 3D MANDLEBROT - Kalter Rauch - 12-14-2018

… your impression of a steampunk power generator?

DE Combinate Sphere Heightmap Void(Aexionc+MengerSmt+Hopf4D+Aexion1)Julia

[Image: iud6YpX.jpg]

DE Combinate Heightmap(Faehrten+MengerKochV2+General)

[Image: fMSNRsY.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-15-2018

[Image: StHaIfU.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-15-2018

DE Combinate SphereHeightmap(BenesiPine+MengerSmt+Hopf4d)

[Image: uaETBOn.png]


RE: 3D MANDLEBROT - Vianova - 12-18-2018

...

DE Combinate Heightmap(Faehrten+MengerKochV2+General ... from post 1969 -- a couple back

I made an enneagon first -- too stiff,
so I reconstructed that into a hybrid hex and hybrid octagonal grid

[Image: C40JViQ.jpg]




[Image: wksmOFt.jpg]


Looks like they could have been brightened a pinch with the enhance function.

...


RE: 3D MANDLEBROT - Kalter Rauch - 12-18-2018

What I'm thinking is that some of those forms 
are like some of the botryoidal agate images I've seen.

[Image: iSDgPRO.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-20-2018

I experimented with forming botryoids
and found that the "odd stitching" you saw recently
are actually the junctions between the spherical forms.

The idea is to first make a spherical heightmap with no relief features,
and then hybridize it with a Juliabulb, etc,
putting the sphere inside where it is scaled to expand 
to just the inside surface of the Jbulb.
Then a certain combinate method is used to smooth the sphere into
features directly adjacent.

[Image: Jv2KD2S.png]


RE: 3D MANDLEBROT - Vianova - 12-23-2018

...

A remake of DE Combinate Heightmap(Faehrten+MengerKochV2+General ... from post 1969


[Image: FjDnWaY.jpg]

...


RE: 3D MANDLEBROT - Kalter Rauch - 12-24-2018

[Image: thumbsup.png]

I found a Torus HeightMap formula.
Here it was DE Combinated with a MengerSMT/Hopf4D hybrid...


[Image: me1oqYC.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-24-2018

DE Combinate AexionC(HeightMap+TorusHeightMap)

[Image: GpPOmYW.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-30-2018

[Image: SpwRU2L.jpg]


RE: 3D MANDLEBROT - Kalter Rauch - 12-30-2018

[Image: vievaeQ.jpg]


RE: 3D MANDLEBROT - Vianova - 01-02-2019

...
You have been busy!
I am just getting back to having some time ... to have some time. ... Hmm2

Of the last three:

DE Combinate AexionC(HeightMap+TorusHeightMap)
post 1977

untitled
post 1979

both look great at 400% + , and by scrolling through the image slowly.
In the image from post 1979 I would have to take a corner quadrant and replicate that.

...