11-07-2017, 03:47 AM

...

Universal Harmonic Code is the ancient cultural math science.

Superb math progressions were created by ancient man,

to isolate Pi and the simple square roots.

Geometry was the sacred geometry of the Earth and the Solar System.

Every planet and lunar movement was observed and accounted for.

Calendar count systems were an extremely important function of ancient cultures.

Does anyone realize how ridiculous the current calendar is?

We have months with 29, 30 and 31 days.

It's fucking ridiculous.

The easiest simplest most common sense calendar would be the 364 day calendar,

with one day free

at the end of each 364 day year.

13 months of 28 days each, which contain 4 weeks of 7 days, per month.

13 x 28 = 364 ---> + 1 = 365

Some fucking Pope came up with an abomination called the Gregorian calendar.

And that is how we live now.

-----------------------------------------------------------------------------------------------------------

Zahi Hawass and Lehner both hate Harmonic Code attached to the Giza Pyramids.

The parasite and the Jew spook archaeologist haunt Giza like ghouls.

My type of work on pyramid code geometry is what they hate the most.

Lehner needs to be compelled to release his full measurement data.

He did not measure 230.33 meters for each base length of the Khufu Pyramid,

that is his average, or perhaps he only measured one base length.

That would not surprise me.

I am surprised that Hawass is still alive and back in the saddle at Giza.

Powerful contingencies have propped up this parasite into his position of power,

so as to control the information flow on all Giza activity and discovery.

The Four Slope Khufu Pyramid

Note:

any cubit generated height can be employed to develop a cubit system model,

to display a four slope pyramid.

I chose the Pi cubits as primary process to generate this model,

so as to incorporate ancient and modern constructs in the design.

Four slopes are supplied, one using pure Pi,

and three of them are drawn from ancient cultural pi progression values.

Note as well that the pure modern Pi could also be represented by the ancient fraction:

417392 / 132860 -- with ten decimal accuracy.

In order to display a four slope pyramid,

{each Side Face has a slightly different slope from the others},

one has to understand what happens with the pyramid peak.

To develop multiple slope pyramids,

the original square base pyramid first gets augmented into a rectangular base pyramid.

Thus, in the two slope pyramid,

you simply have the original square base augmented into slightly rectangular base,

however,

the vertical height axis <---> remains perfectly positioned in the center of the base rectangle.

In the three slope pyramid,

all that was needed to accomplish three slopes,

when starting with a square base,

was to shift the vertical height axis ---> off the base center point ---> just a pinch in one direction.

The shifting of the axis need only move once,

a small amount in a directional line towards any base length direction.

The vertical height axis remains totally perpendicular to the base during and after the shift.

Automatically you have a three slope pyramid -- with a slightly rectangular base.

Your pyramid height axis is now --> not <-- exactly in the center of the rectangular base.

To display a four slope pyramid the shift happens twice.

First the vertical height axis is shifted directly towards one base length.

Let us just say that vertical axis height is shifted -- exactly -- One Inch -- for practical explanation purposes.

You now have a three slope pyramid.

Now all you have to do,

is shift the vertical height axis again-- One More Inch

in the direction of the adjacent base length,

that is at a right angle, or 90 degrees from the directional position of the first base length.

{This develops into all four base lengths with a slightly offset center point}.

You now have a four slope pyramid.

But,

it retains a rectangular base,

with one inch offset "midpoints" on the base lengths themselves,

corresponding directly with the offset pyramid height axis shift movement.

That is probably hard to imagine,

and the image will have to suffice to explain how the pyramid works.

Note:

how each half base length is defined both by the ratio of the cubits ---> x 378,

but also,

as a function of a Pi multiple,

ie,

half base length 377.8479164 feet = 4534.174997 inches = 70 x Pi x cubit 20.6181818~

{cubit 20.1681818~ = 1134 / 55}.

The ratio of the cubits ---> x 378 --- as seen in the image,

essentially standardizes a royal cubit from the base length of 756 feet = 2 x 378.

756 feet as a standard model base length,

allows the functioning of the cubit computations,

to follow through with a -- constant base length value -- for all cubits to operate with in the math.

756 feet is obvious choice therein,

of possible base lengths to employ in the cubit math operations.

My base length average converged very nicely to the Petrie average.

...

Universal Harmonic Code is the ancient cultural math science.

Superb math progressions were created by ancient man,

to isolate Pi and the simple square roots.

Geometry was the sacred geometry of the Earth and the Solar System.

Every planet and lunar movement was observed and accounted for.

Calendar count systems were an extremely important function of ancient cultures.

Does anyone realize how ridiculous the current calendar is?

We have months with 29, 30 and 31 days.

It's fucking ridiculous.

The easiest simplest most common sense calendar would be the 364 day calendar,

with one day free

at the end of each 364 day year.

13 months of 28 days each, which contain 4 weeks of 7 days, per month.

13 x 28 = 364 ---> + 1 = 365

Some fucking Pope came up with an abomination called the Gregorian calendar.

And that is how we live now.

-----------------------------------------------------------------------------------------------------------

Zahi Hawass and Lehner both hate Harmonic Code attached to the Giza Pyramids.

The parasite and the Jew spook archaeologist haunt Giza like ghouls.

My type of work on pyramid code geometry is what they hate the most.

Lehner needs to be compelled to release his full measurement data.

He did not measure 230.33 meters for each base length of the Khufu Pyramid,

that is his average, or perhaps he only measured one base length.

That would not surprise me.

I am surprised that Hawass is still alive and back in the saddle at Giza.

Powerful contingencies have propped up this parasite into his position of power,

so as to control the information flow on all Giza activity and discovery.

The Four Slope Khufu Pyramid

Note:

any cubit generated height can be employed to develop a cubit system model,

to display a four slope pyramid.

I chose the Pi cubits as primary process to generate this model,

so as to incorporate ancient and modern constructs in the design.

Four slopes are supplied, one using pure Pi,

and three of them are drawn from ancient cultural pi progression values.

Note as well that the pure modern Pi could also be represented by the ancient fraction:

417392 / 132860 -- with ten decimal accuracy.

In order to display a four slope pyramid,

{each Side Face has a slightly different slope from the others},

one has to understand what happens with the pyramid peak.

To develop multiple slope pyramids,

the original square base pyramid first gets augmented into a rectangular base pyramid.

Thus, in the two slope pyramid,

you simply have the original square base augmented into slightly rectangular base,

however,

the vertical height axis <---> remains perfectly positioned in the center of the base rectangle.

In the three slope pyramid,

all that was needed to accomplish three slopes,

when starting with a square base,

was to shift the vertical height axis ---> off the base center point ---> just a pinch in one direction.

The shifting of the axis need only move once,

a small amount in a directional line towards any base length direction.

The vertical height axis remains totally perpendicular to the base during and after the shift.

Automatically you have a three slope pyramid -- with a slightly rectangular base.

Your pyramid height axis is now --> not <-- exactly in the center of the rectangular base.

To display a four slope pyramid the shift happens twice.

First the vertical height axis is shifted directly towards one base length.

Let us just say that vertical axis height is shifted -- exactly -- One Inch -- for practical explanation purposes.

You now have a three slope pyramid.

Now all you have to do,

is shift the vertical height axis again-- One More Inch

in the direction of the adjacent base length,

that is at a right angle, or 90 degrees from the directional position of the first base length.

{This develops into all four base lengths with a slightly offset center point}.

You now have a four slope pyramid.

But,

it retains a rectangular base,

with one inch offset "midpoints" on the base lengths themselves,

corresponding directly with the offset pyramid height axis shift movement.

That is probably hard to imagine,

and the image will have to suffice to explain how the pyramid works.

Note:

how each half base length is defined both by the ratio of the cubits ---> x 378,

but also,

as a function of a Pi multiple,

ie,

half base length 377.8479164 feet = 4534.174997 inches = 70 x Pi x cubit 20.6181818~

{cubit 20.1681818~ = 1134 / 55}.

The ratio of the cubits ---> x 378 --- as seen in the image,

essentially standardizes a royal cubit from the base length of 756 feet = 2 x 378.

756 feet as a standard model base length,

allows the functioning of the cubit computations,

to follow through with a -- constant base length value -- for all cubits to operate with in the math.

756 feet is obvious choice therein,

of possible base lengths to employ in the cubit math operations.

My base length average converged very nicely to the Petrie average.

...